Posts made in December, 2015

What You Should Know About Your Commercial Roof And Infrared Scanning

Few things can be as sneakily destructive as a leak in the roof of your commercial building. Whether you’ve just purchased a new building or you’re just trying to keep up with the condition of your existing one, it’s important to monitor the roof condition regularly. One of the best ways to catch a potential problem before it becomes disastrous is through the use of an infrared scan. Here are a few things that you should know about infrared roof scans for your commercial building.

What Are Infrared Scans?

Infrared roof scans are thermal images of the building’s roof that show you variations in temperature across the surface. These are important, because the changes in temperature can often indicate the presence of a leak or other damage.

How Can You Determine the Severity?

To the untrained eye, it can be difficult to tell how severe the leak is. If you know how to interpret infrared images, though, you might be able to make a reasonable estimate as to its severity. For example, the more heat that’s retained in the area, the more water there’s likely to be in the space. You’ll just need to know how to read the color gradient on the thermal imaging report. If you can, you should be able to isolate the spots on the roof that have the highest moisture concentration. Start there when you’re looking to do repairs, because those are likely the most heavily damaged areas.

When Should You Plan for Infrared Scans?

It’s often best to schedule an infrared scan during the early evening hours, because it gives you the benefit of the sun’s rays heating the roof all day, which will also heat any water that’s present in the roofing material. The water will retain heat longer than the roof, so any hot spots that show up on the scan are likely indications of the presence of water and the risk of a roof leak.

To get the best results from your scan, you should schedule it on a day that is sunny, warm and clear. This ensures that your roof gets the maximum benefit of the sun’s rays. This improves the accuracy of the scan. Sometimes, the spring or fall make the best seasons for this, because that’s when the weather is usually mild. It also gives you plenty of time to address any damage before the severe weather comes in.

Having your company’s roof evaluated by a commercial roofing contractor is important. It makes it easier for you to focus your efforts on repair where they’re most needed. With an infrared scan and a professional’s guidance, you can keep your roof in good condition. 

Once you’ve had your infrared scan and found the problem areas, contact a professional like Bell Roof Co or others locally to help you fix the problem.

Read More

How To Choose A Range That’ll Keep Your New Kitchen Humming

When planning a kitchen remodel project, few people give much thought to the configuration and choosing of the oven and stove. But choosing the right style and amenities in your new kitchen range can make a big difference in how well your kitchen functions. Here are 3 steps to choosing the right overall unit. 

Together or Separate?

Although a traditional single unit — with 4 or 6 burners on top and an oven inside — is still a simple and popular choice, there are other options these days. Separating the cooktop and the oven makes it easier for more than one person to cook at a time. This is a great idea for people who have large families or entertain regularly. It can also reduce the visual footprint of your range, allowing you to blend in the cooktop where it fits best and then place the oven under the counter for a more seamless look across the kitchen’s landscape. 

Gas or Electric?

Electric ranges remain the least expensive type, and they come with new technology and style that makes them easier to maintain and clean than past models. For example, smooth-top surfaces which house the electric or halogen coils underneath an easy-to-clean surface are growing in popularity. However, gas stoves are preferred by many cooks due to their quick heating and cooling times as well as better precision. You can even find units that provide the best of both worlds, featuring gas burners and either an electric or convection oven. Convection ovens are less popular, as they may leave food dried out due to their heated air method. 

How Can It Be Cleaned?

Smooth-top surfaces, modern technology and things like touch controls make many modern ranges easier to keep clean than earlier types. For the easiest cleaning, look for features such as:

  • Ceramic glass cooktops over electric burners
  • Self-cleaning features (either continuous-clean or a high-heat cycle clean)
  • Sealed gas burners
  • Fewer or simpler knobs and handles
  • A seamless (one-piece) backsplash

Choosing your new stove or range should be something you create time for during the early stages of your kitchen remodel. With so many options, it’s important to have a style firmly in mind before deciding on the kitchen layout, the wiring and the look of your other appliances. And having enough time to decide what works best for your family ensures that you will be able to make the wisest choice. 

For kitchen remodeling specialists, contact a company such as Olson Cabinets & Woodworking Inc.

Read More

3 Reasons Why You Shouldn’t Attempt Your Own Garage Door Repairs

Your garage door is probably an important and often-used part of your home, so when it stops working as it is supposed to, you might find yourself tinkering with it to get it back working. However, it’s never a good idea to work on your own garage door; instead, you’ll need to hire a garage door repair professional to perform a full inspection on your garage door and to make necessary repairs. These are a few reasons why.

1. You Won’t Know if You’re Better Off Replacing

Garage doors can typically be repaired, but there are some situations in which it’s actually smarter to completely replace them. If your garage door has multiple problems, it might be cheaper to replace it. If your garage door is too old, you and your family will be safer if you replace it. Your garage door professional will be able to look at your garage door and determine if you are better off repairing or replacing it.

2. You Could Put Yourself in Danger

The truth is that working on a garage door can be quite dangerous, particularly if you don’t know what you’re doing. Standing on a ladder and working on a garage door can be dangerous enough in itself, but the moving parts of your garage door could hurt you, or your garage door could come crashing down if you tinker with the wrong part. A professional will know how to work on your garage door safely, and you’ll be able to prevent potential injury to yourself.

3. You Might Not Repair it Properly

Failing to repair your garage door properly can put you and your family at serious risk. It can also cause your garage door not to function properly or to fail before it normally would have. A garage door repair professional will be able to find the source of garage door problems and can fix your garage door in the right way. This can help your garage door last a lot longer and can help prevent serious problems that could put you, your loved ones, your guests and your vehicles in danger.

As you can see, it’s actually best to hire a professional (take a look at the site here for more information) to inspect and repair your garage door. Even though you might be tempted to tinker with it yourself, you’re sure to be glad that you did if you hire a professional instead of trying to handle it the DIY way.

Read More

Earthquake and tornadoes were my biggest fear as a child. They still in someways are, but as I'm building more and more homes, I've begun learning about the different safety measures that are incorporated with the architectural designing. I think it's good to know where the best places to stand are in case of the natural disaster, and which places to avoid. As I've done research I've learned how glass can shatter and much further then what I thought –which has helped me mentally prepare myself to stay away from windows. I think the best way to be prepared for anything is to become educated on it, which is why I'm maintaining this site.